WideBuddy: FuzzBuddy's Stereo Width, On Its Own. Wider Mixes, Same Mono.

WideBuddy is the stereo width section of FuzzBuddy as a separate, lighter plugin, without the saturation, plus a linear-phase mode and stereo metering. It splits your sound into four frequency bands and gives each one its own width, spread and level. Keep the bass and kick in the centre, tidy up a sprawling midrange, or open the highs into a wide, airy stereo field. The width WideBuddy adds cancels out cleanly in mono, so your mix sounds the same on a phone speaker or in a club.

Free 7-day trial · fully functional · no credit card · macOS & Windows | Explore features ↓

Already own FuzzBuddy? You already have its multiband width and spread. WideBuddy adds a linear-phase mode for mastering, a stereo correlation meter and a stereo scope, without the saturation.
WideBuddy multiband stereo width plugin: crossover display with Spread Mono and Source Mono, stereo Width and Spread, correlation meter and stereo scope, master section, and four band cards with width, spread and level

Four Bands, Each As Wide As It Should Be

equalizer

Four Bands, Clean Crossovers

Smooth 24 dB/oct crossovers that add back up perfectly flat, so nothing changes until you change something.

4 bands · 24 dB/oct · Flat sum
surround_sound

Width and Spread on Every Band

Width narrows a band's own stereo, from 100 % down to mono. Spread adds new stereo width that disappears in mono instead of thinning your sound.

Width · Spread · Level
speaker

Mono-Safe Low End

Spread Mono keeps added width out of the bass, and Source Mono folds the original bass to mono for a tight centre.

Spread Mono · Source Mono
tune

Master Controls

Master Width turns all four band widths down together, and Spread Amount turns all four spreads up or down together.

Master Width · Spread Amount
linear_scale

Linear-Phase Mode

The same four bands with no phase shift at the crossovers, for mastering. It adds 48 ms of latency, which your DAW compensates automatically.

Mastering · No phase shift
monitoring

See What You Hear

A crossover display with the live signal in each band, a stereo correlation meter, a stereo scope and input and output meters show exactly what reaches mono.

Live display · Correlation · Scope
headphones

Solo, Mute and Bypass

Hear one band alone, or leave it untouched.

Per band
library_music

16 Presets

For mix bus, mastering, instruments and stereo correction. Save your own, and lock Input and Output while you browse.

Mix bus · Mastering · Instruments
handyman

Made for Working

Input and Output gain with a link, an output limiter, a bypass that keeps the timing, a resizable window, undo and redo, and tooltips.

Limiter · Undo · Resizable

Split It. Shape It. Check It In Mono.

The crossover display shows each band in its own colour with the live signal running through it, and two sliders under it set where Spread Mono and Source Mono start.

Move the crossovers to where your sound needs them, and the correlation meter and stereo scope show what your width does to mono.

  • Keep the bass and kick in the centre
  • Tidy up a sprawling midrange
  • Open the highs into a wide, airy stereo field
WideBuddy's crossover display: four coloured bands with crossovers at 200 Hz, 1 kHz and 5 kHz, the live signal, LR4 or linear phase, and the Spread Mono and Source Mono sliders

Wide Where It Should Be. Mono Where It Counts.

Every band has its own Width, Spread and Level. Narrow a band that sprawls, or add Spread for new width that disappears in mono instead of thinning your sound.

Solo, mute or bypass any band to hear exactly what it adds, then use Master Width and Spread Amount to move all four together.

WideBuddy's four band cards: a stereo width display, and Width, Spread and Level knobs for each band

Linear Phase, For The Master.

Switch the crossover from LR4 to Linear Phase and the four bands meet with no phase shift at all. It adds 48 ms of latency, which your DAW compensates automatically.

Start from a mastering preset, narrow the lows a little, add a touch of spread up top, and keep an eye on the correlation meter.

WideBuddy with the Master Sheen preset: linear-phase crossover with 48 ms latency, narrowed low band and gentle spread on the upper bands

Works In Your DAW.

Native on Apple Silicon & Intel Macs and Windows 10/11.

AU Audio Units
VST3 Virtual Studio
laptop_mac macOS
window Windows

macOS: AU · VST3 · macOS 10.13 or later · Apple Silicon and Intel (Universal)
Windows: VST3 · Windows 10 or later, 64-bit

Built By a Musician, For Musicians

Widening a whole mix is a gamble: the highs open up, but the bass smears and everything thins out on a phone speaker. FuzzBuddy's stereo section solved that for me, and often that was all I wanted on a mix bus or a master, so WideBuddy is that section on its own: width only where it belongs, and a mix that sounds the same in mono.

I'm Ajja — musician since age nine, self-taught coder since the early 90s, and recording and worldwide touring artist for over 20 years. WideBuddy joins FuzzBuddy, Interlock and Pattern303 in the growing family of tools from Ajja Sonic.

Read the full story

WideBuddy: Questions & Answers

What is WideBuddy?

WideBuddy is the stereo width section of FuzzBuddy as its own plugin, without the saturation. It splits your sound into four frequency bands and gives each one its own width, spread and level, so you can keep the bass and kick in the centre, tidy up a sprawling midrange and open the highs into a wide, airy stereo field.

I already have FuzzBuddy. Do I need WideBuddy?

Only if you want what WideBuddy adds. FuzzBuddy already has the same multiband width and spread, with saturation on top. WideBuddy adds a linear-phase mode for mastering, a stereo correlation meter and a stereo scope, in a lighter plugin without the saturation.

Will my mix still sound right in mono?

Yes. The width WideBuddy adds (Spread) cancels out cleanly in mono instead of thinning your sound, so your mix sounds the same on a phone speaker or in a club. The correlation meter and stereo scope show exactly what reaches mono.

What is the difference between Width and Spread?

Width narrows a band's own stereo, from 100 % down to mono. Spread adds new stereo width that disappears in mono. Master Width turns all four band widths down together, and Spread Amount turns all four spreads up or down together.

How do I keep the low end in the centre?

Spread Mono keeps added width out of the bass, and Source Mono folds the original bass to mono, for a tight centre. Each has its own frequency slider.

Can I use it for mastering?

Yes. The crossovers are 24 dB/oct and add back up perfectly flat, so nothing changes until you change something. Linear-phase mode gives the same four bands with no phase shift at the crossovers; it adds 48 ms of latency, which your DAW compensates automatically.

Which computers and DAWs does it work with?

WideBuddy runs on macOS 10.13 or later (AU and VST3, Apple Silicon and Intel) and Windows 10 or later (VST3, 64-bit). It works in any DAW that loads AU or VST3 plugins, such as Ableton Live, Logic Pro (Mac), Bitwig Studio, Cubase, Reaper or Studio One.

Is there a free trial?

Yes. The 7-day trial is fully functional and needs no credit card.

Ready to go wide?

Trial is fully functional for 7 days. No credit card required.